Disabled Access Handrails

Galvanised tubing plus connectors & brackets for your railings.

The DDA Range is designed to meet the requirements of part 'M' of the Building Regulations 2004 regarding provisions for disabled people. The DDA range conforms to the requirement for smooth continuous handrail using 42.4mm O/D galvanised tube. The Building Regulations state the rail shall be between 40 and 45mm O/D. All fittings are cast iron and galvanised to BS EN ISO 1461. Suitable for stairs, ramps and walkways.

Galvanised Tube for Disabled Access Handrails

Available in various lengths
1.044m to 6.5m

SPECIAL OFFER!
GALVANISED TUBE CARRIAGE ONLY £10!

TUBE SIZES

C Tube: 42.4mm dia (use for horizontals)
D Tube: 48.3mm dia (use for uprights)

To attach the 'DDA04 INTERMEDIATE BRACKET' or the 'DDA02 HANDRAIL CONNECTOR' to the 48.3mm o/d upright.

£10.88

To attach the end of the 42.4mm o/d handrail tube at 90° to the 48.3mm o/d upright. Used in conjunction with 'DDA01 UPRIGHT CONNECTOR' and' DDA07 INTERNAL CONNECTOR'.

£12.50

To support 42.4mm o/d handrail tube to a wall. The tube is fixed to this wall bracket using either 2 x self tapping screws or 2 x pop rivets.

£13.47

DDA04
Intermediate bracket

To support the top or middle rail tube at an upright in conjunction with a 'DDA01 UPRIGHT CONNECTOR'. The 42.4mm o/d tube is fixed to this fitting using either 2 x self tapping screws or 2 x pop rivets.

£13.50

DDA05
End return

For terminating the 42.4mm o/d handrail tube back to a wall. Used in conjunction with a 'DDA07 INTERNAL CONNECTOR'.

£13.25

Expanding elbow for creating a smooth 90° bend in the 42.4mm o/d tube.

£15.50

Expanding internal connector for joining sections of 42.4mm o/d tube, or other DDA fittings.

£4.99

48.3mm o/d plastic end cap for inserting into the open tube on the top of the upright. For a permanent fix, a suitable adhesive should be used.

64p

For creating an adjustable bend between the horizontal and the vertical.

£25.95