metal parts for iron gates railings fencing

Key Clamp Handrail System & Accessories

(Also known as Kee Klamp, Tube Clamp, or Interclamp)
Handrails, clamps, tube, angles & connectors, plus other components.

Key clamp fittings and galvanised tube are the ideal solution for easy construction of all safety railings, barriers, guardrails, stair rails and handrails. They are also suitable for a wide variety of
easily assembled structures such as climbing frames, platforms, stages and heavy duty storage racks.
Or create your own 'industrial chic' style furniture such as a key clamp table and bench, key clamp bed, shelving or clothes rail!

Need help planning which parts you need?
We will work it out for you - just give us a call or email

Galvanised Tube

Available in various lengths
1.044m to 6.5m

SPECIAL OFFER!
CARRIAGE ONLY £10!

TUBE SIZES
A Tube: 26.9mm dia
B Tube: 33.7mm dia
C Tube: 42.4mm dia
D Tube: 48.3mm dia
E Tube: 60.3mm dia


galvanised tube

 

1 inch
=
25.4mm or 2.54cm

1 foot
=
304.8mm or 30.48cm

1 yard
=
914.4mm or 91.44cm

Key Clamp Top 1:
LONG TEE

key clamp handrail - LONG TEE

(For A/B/C/D/E Tube)

For use on straight and level guardrail to connect the upright to the top rail. Tubes may be joined inside this fitting. Normally used in conjunction with the 'MIDDLE 1 INTERSECTION' fitting when building double rail handrail or guardrail.


Key Clamp Top 3:
CORNER

key clamp handrail - CORNER

(For A/B/C/D/E Tube)

For use on straight and level guardrail to connect the two top rails to the upright at a 90° corner post. Normally used in conjunction with the 'MIDDLE 3 CORNER INTERSECTION' fitting when building double rail handrail or guardrail.


Key Clamp Top 7:
SWIVEL TEE

key clamp handrail - SWIVEL TEE

(For A/B/C/D/E Tube)

Used mainly for sloping handrails, this swivel pivots at least 80° from the fitting in either direction.


Key Clamp Elbow 1:
90° ELBOW

key clamp handrail - 90º ELBOW

(For A/B/C/D/E Tube)

For use on straight and level guardrail to connect the top rail to the upright. Normally used in conjunction with the 'MIDDLE 2 SIDE TEE' fitting when building an end post on a double rail handrail or guardrail. This 2 way elbow can also be used to create a 90° bend.


Key Clamp Elbow 2:
VARIABLE ELBOW

key clamp handrail - VARIABLE ELBOW

(For B/C/D Tube)

For connecting two tubes at angles of 15°-60° on guardrails or handrails. Using this fitting means it is not necessary to bend tube.


Key Clamp Middle 1:
INTERSECTION

key clamp handrail - INTERSECTION

(For A/B/C/D/E Tube)

For use on straight and level guardrail to connect the mid rails to the upright. The upright must remain continuous with the cross rails being cut. Normally used in conjunction with the 'TOP 1 LONG TEE'' fitting when building double rail handrail or guardrail.


Key Clamp Middle 2:
SIDE TEE

key clamp handrail - SIDE TEE

(For A/B/C/D/E Tube)

For use on straight and level guardrail to connect the upright to the top rail or the end or mid rail to the upright. Do not join tubes inside this short tee - use a 'TOP 1 LONG TEE' fitting. Normally used in conjunction with the 'MIDDLE 1 INTERSECTION' when building double rail handrail or guardrail.


Key Clamp Middle 3:
CORNER INTERSECTION

key clamp handrail - CORNER INTERSECTION

(For A/B/C/D/E Tube)

For use on straight and level guardrail to connect the mid rails to the upright at a 90° corner. Normally used in conjunction with the 'TOP 3 CORNER' when building double rail handrail or guardrail.


Key Clamp Middle 5:
ADJUSTABLE CROSS 30-45°

key clamp handrail - VARIABLE INTERSECTION 30º-45º

(For B/C/D Tube)

For use on steeper slopes or stairs as an intermediate cross connector with an angle of 30°-45° with the upright remaining vertical. Normally used in conjunction with the '129: ADJUSTABLE SHORT TEE 30-60°' when building double rail handrail or guardrail. This adjustable cross fitting is not recommended for use as the top fitting on handrail or guardrail.


Key Clamp Middle 6

key clamp handrail - ADJUSTABLE INTERSECTION

Adjustable Intersection
(For A/B/C/D/E Tube)


Key Clamp Middle 7:
DOUBLE SWIVEL COMBINATION

key clamp handrail - SWIVEL INTERSECTION

(For A/B/C/D Tube)

Typically used on sloping handrail/guardrail. This fitting combines 1 x 167M & 2 x 173F. The swivels can travel approximately 85° from the horizontal in both directions. NOT DESIGNED TO WITHSTAND LATERAL LOADS. AN ENTIRE STRUCTURE SHOULD NOT BE BUILT USING ONLY SWIVEL FITTINGS, THIS WOULD BE UNSTABLE.


Key Clamp Middle 8:
SIDE OUTLET TEE

key clamp handrail - SIDE INTERSECTION

(For A/B/C/D/E Tube)

For constructing market stall or play frame type structures.


Key Clamp Middle 9:
90° CORNER SWIVEL COMBINATION

key clamp handrail - 90º SWIVEL INTERSECTION

(For B/C/D Tube)

For use with sloping handrail/guardrail. This fitting combines 1 x 168M & 2 x 173F. The swivels can travel approximately 85° from the horizontal in both directions. NOT DESIGNED TO WITHSTAND LATERAL LOADS. AN ENTIRE STRUCTURE SHOULD NOT BE BUILT USING ONLY SWIVEL FITTINGS, THIS WOULD BE UNSTABLE.


Galvanised Tube

Available in various lengths
1.044m to 6.5m

SPECIAL OFFER!
CARRIAGE ONLY £10!

TUBE SIZES
A Tube: 26.9mm dia
B Tube: 33.7mm dia
C Tube: 42.4mm dia
D Tube: 48.3mm dia
E Tube: 60.3mm dia


Key Clamp Middle 12:
RAMP TEE

key clamp handrail - RAMP TEE

(For D Tube)

Ramp tee fitting designed for use on ramps or other shallow gradients between 4-10°.

£7.22

Key Clamp Base 1:
RAILING BASE FLANGE

key clamp handrail - TALL BASE

(For A/B/C/D/E Tube)

A structural base plate for all applications using vertical posts. For guardrail the fitting should be positioned with the base holes at 90° to the line of the rail to give maximum strength.


Key Clamp Base 2:
WALL BASE

key clamp handrail - WALL BASE

(For A/B/C/D/E Tube)

For terminating cross rails to walls etc. It may also be used as a base plate for non-load bearing structures such as chairs, benches, tables etc. DO NOT USE AS A BASE PLATE FOR HANDRAIL/GUARDRAIL OR IN LOAD BEARING APPLICATIONS.


Key Clamp Base 3:
SIDE BASE

key clamp handrail - SIDE BASE

(For B/C/D Tube)

For use as an offset structural side palm fixing for either straight or sloping guardrail. The tube is unable to pass through the standard fitting - should this be required then the base must be reamed out. Use in conjunction with a 'BASE 7 WALL HANDRAIL BASE' when a secondary inline base fixing is required.


Key Clamp Base 4:
TRIANGULAR SIDE BASE

key clamp handrail - TRANGULAR SIDE BASE

(For B/C/D Tube)

For use as a structural side palm fixing for the upright on either straight or sloping handrail or guardrail keeping the upright as close as possible to the slope or stairs. When used as a secondary inline fixing the base needs to be machined to allow the tube to pass through and the bottom fixing hole then becomes redundant. BASE THICKNESS 7MM.


Key Clamp Base 5:
WALL SWIVEL SIDE BASE

key clamp handrail - WALL SWIVEL SIDE BASE

(For A/B/C/D/E Tube)

Non-structural male locating swivel. This fitting combines 1 x 169M & 1 x 173F. The swivel can travel approximately 85° from the horizontal in both directions. NOT TO BE USED AS A BASE PLATE FOR GUARDRAIL AND NOT DESIGNED TO WITHSTAND LATERAL LOADS.


Key Clamp Base 6:
SIDE BASE

key clamp handrail - SIDE BASE

(For B/C/D Tube)

Designed to provide a base for railings and other structures that need a side mounted flush fixing plate. When used as a secondary inline fixing the base needs to be reamed out to allow the tube to pass through.


Key Clamp Base 7:
WALL HANDRAIL BASE

key clamp handrail - WALL HANDRAIL BASE

(For B/C/D Tube)

For wall mounted handrailing, this fitting can also be used to hold in place kick plate on guardrail, or even display boards at exhibitions. DO NOT USE AS A SOLITARY BASE PLATE FOR HANDRAIL/GUARDRAIL OR SIMILAR LOAD BEARING APPLICATIONS.


Key Clamp Base 8:
GROUND BASE

key clamp handrail - GROUND BASE

(For B/C/D Tube)

For use as a base plate for a removable upright that can be removed without leaving any obstructions. The tube is held in place by the setscrew. The casting hole should be a minimum 300x300x300mm.


Key Clamp Base 9:
WEATHER COVER SHIELD

key clamp handrail - COVER SHIELD

(For B/C/D Tube)

For weather protection around a 'BASE 1: RAILING BASE FLANGE' on a flat roof guardrail system. This fitting needs to be sealed with a suitable sealant.


Key Clamp Base 10:
SWIVEL BASE SECTION

key clamp handrail - WALL BASE ONLY

Non-structural male locating base, typically used to create a swivel base. NOT DESIGNED TO WITHSTAND LATERAL LOADS.

£3.99

Key Clamp Crossover 7:
CROSSOVER

key clamp handrail - CROSSOVER

(For A/B/C/D/E Tube)

Used for racking systems or offset handrail/guardrail. Tubes cannot be joined inside this fitting.


Key Clamp Crossover 8:
FOUR WAY CROSS

key clamp handrail - CROSSOVER 6 WAY

(For A/B/C/D/E Tube)

For joining tubes together in the centre of a structure. This four way cross fitting allows the upright to pass through the centre with the cross rails joining at 90° to the upright.


Key Clamp Crossover 9:
CLAMP ON CROSSOVER

key clamp handrail - CLAMP ON CROSSOVER

Clamp on Crossover
(For A/B/C/D Tube)

For adding to an existing offset structure without the need for any dismantling.


Key Clamp Crossover 10:
COMBINATION SOCKET

key clamp handrail - CROSSOVER WITH OUTLET

(For A/B/C/D/E Tube)

Typically used for the construction of pallet racking or shelved racking systems. Tubes may not be joined inside this fitting.


Key Clamp Connector 1:
EXTERNAL CONNECTOR

key clamp handrail - EXTERNAL CONNECTOR

(For A/B/C/D/E Tube)

Inline external connector for joining two tubes together in a run. For an inline joint that is the same diameter as the tube, the 'CONNECTOR 2 INTERNAL CONNECTOR' fitting should be used. Not recommended as a structural joint.


Key Clamp Connector 2:
INTERNAL CONNECTOR

key clamp handrail - INTERNAL CONNECTOR

(For B/C/D Tube)

Inline internal connector for joining two tubes together. Only for use with medium gauge 3.2mm wall thick tube. This joint should never be used as a load bearing joint and must be used within 100mm of an upright.


Key Clamp Connector 3:
MESH PANEL CLIP - SINGLE

key clamp handrail - SINGLE MESH CLIP

(For A/B/C/D Tube)

For retaining weld mesh panels into handrail/guardrail. To correctly retain the weld mesh panel in place using this clip, the mesh should be framed with an 8mm bar. Supplied with stainless steel hexagonal head screw and nut.


Key Clamp Connector 4:
MESH PANEL CLIP - DOUBLE

key clamp handrail - DOUBLE MESH CLIP

(For B/C/D Tube)

For retaining weld mesh panels into handrail/guardrail. To correctly retain the weld mesh panel in place using this clip, the mesh should be framed with a 8mm bar. Supplied with stainless steel hexagonal head screw and nut.

Galvanised Tube

Available in various lengths
1.044m to 6.5m

SPECIAL OFFER!
CARRIAGE ONLY £10!

TUBE SIZES
A Tube: 26.9mm dia
B Tube: 33.7mm dia
C Tube: 42.4mm dia
D Tube: 48.3mm dia
E Tube: 60.3mm dia


Key Clamp Support:
LOCKING COLLAR

key clamp handrail - LOCKING COLLAR

(For B/C/D Tube)

For providing additional strength to fittings on high load structures.


Key Clamp Hinge 7:
EYE PART

key clamp handrail - EYE PART

(For B/C/D Tube)

Female section of a two-part gate hinge, used in conjunction with the 'HINGE 8 HOOK PART' fitting.


Key Clamp Hinge 8:
HOOK PART

key clamp handrail - HOOK PART

(For B/C/D Tube)

Male section of a two-part gate hinge, used in conjunction with the 'HINGE 7 EYE PART' fitting.


Key Clamp Hook 9

key clamp handrail - CHAIN HOOK PART

(For B/C/D Tube)

This chain hook is not recommended as a permanent chain location - for permanent chain locations one end should be retained in place using a '173M: SINGLE SWIVEL COMBINATION' and fixed with a nut and bolt.


KEY CLAMP PLUG

key clamp handrail - END CAP

(For A/B/C/D/E Tube)

A plastic end cap to seal the open end of tubes. This fitting is a frictional fit only. For a permanent fix, a suitable adhesive should be used.


129
ADJUSTABLE SHORT TEE

key clamp handrail - ADJUSTABLE SHORT TEE

(For B/C/D Tube)

Adjustable fitting between 30-60°. Typically used as a tee connection on steeper stairs and slopes with a vertical upright. May also be used as a structure bracing.


135
CLAMP ON TEE

key clamp handrail - CLAMP ON TEE

(For A/B/C/D/E Tube)

For adding to an existing inline structure without having to dismantle the original structure. MAXIMUM BOLT TORQUE 15N/M. Uses a M10 stainless steel bolt.


141
RAILING SIDE SUPPORT HORIZONTAL

key clamp handrail - RAILING SIDE SUPPORT HORIZONTAL

(For B/C/D Tube)

The Railing Horizontal Side Support is designed to provide a base for railings and other structures that need a side mounted flush fixing plate. When used as a secondary inline fixing the base needs to be reamed out to allow the tube to pass through.


144
RAILING SIDE SUPPORT VERTICAL BASE

key clamp handrail - RAILING SIDE SUPPORT VERTICAL BASE

(For B/C/D Tube)

For use as an offset structural side palm fixing for either straight or sloping guardrail. The tube is unable to pass through the standard fitting - should this be required then the base must be reamed out. Use in conjunction with a 'BASE 7 WALL HANDRAIL BASE' when a secondary inline base fixing is required.


147
INTERNAL SWIVEL TEE

key clamp handrail INTERNAL SWIVEL TEE

(For B/C/D Tube)

For offset variable angle sloping handrail or guardrail in conjunction with a 'MIDDLE 2 SIDE TEE' or 'ELBOW 1 90° ELBOW' fitting.


160
CLAMP ON CROSSOVER

key clamp handrail - CLAMP ON CROSSOVER

(For A/B/C/D/E Tube)

Ideal for retrofitting a horizontal piece to existing railings or structure. Useful when dismantling of the original construction would be difficult.


161
90° ADD ON CROSSOVER

key clamp handrail - 90º CROSSOVER

(For A/B/C/D/E Tube)

Allows additions to existing structures without the need for any dismantling. This 90° crossover is designed to give a 90° offset crossover joint. The tubes may not be joined within this fitting.


165
COMBINATION SOCKET TEE

key clamp handrail - COMBINATION SOCKET TEE

(For A/B/C/D/E Tube)

Typically used for the construction of pallet racking or shelved racking systems. Tubes may not be joined inside this fitting.


167
DOUBLE SWIVEL COMBINATION

key clamp handrail - DOUBLE SWIVEL COMBO

(For A/B/C/D Tube)

Typically used on sloping handrail/guardrail. This fitting combines 1 x 167M & 2 x 173F. The swivels can travel approximately 85° from the horizontal in both directions. NOT DESIGNED TO WITHSTAND LATERAL LOADS. AN ENTIRE STRUCTURE SHOULD NOT BE BUILT USING ONLY SWIVEL FITTINGS, THIS WOULD BE UNSTABLE.


167M
DOUBLE MALE SECTION

key clamp handrail - DOUBLE MALE SECTION

(For A/B/C/D/E Tube)

Double male fitting with the connection lugs at 180° to each other. This fitting can also be used to retain display panels etc. NOT DESIGNED TO WITHSTAND LATERAL LOADS.


168
CORNER SWIVEL

key clamp handrail - CORNER SWIVEL

(For A/B/C/D Tube)

For use with sloping handrail/guardrail. This fitting combines 1 x 168M & 2 x 173F. The swivels can travel approximately 85° from the horizontal in both directions. NOT DESIGNED TO WITHSTAND LATERAL LOADS. AN ENTIRE STRUCTURE SHOULD NOT BE BUILT USING ONLY SWIVEL FITTINGS, THIS WOULD BE UNSTABLE.


IN LINE SWIVEL FITTING

key clamp handrail - INLINE SWIVEL FITTING

(For B/C/D Tube)

Variable angle in-line connection with an adjustable range of up to 200°.

142
TOEBOARD ADAPTOR

key clamp handrail - TOEBOARD ADAPTOR

(For D Tube)

Ideal for guardrailing and balustrading applications where the addition of a toeboard or kick plate is required. Slotted holes in the back plate allow for sideways movements to ease installation.

£11.99

Galvanised Tube

Available in various lengths
1.044m to 6.5m

SPECIAL OFFER!
CARRIAGE ONLY £10!

TUBE SIZES
A Tube: 26.9mm dia
B Tube: 33.7mm dia
C Tube: 42.4mm dia
D Tube: 48.3mm dia
E Tube: 60.3mm dia


168M
90° CORNER SWIVEL MALE

key clamp handrail - 90º CORNER SWIVEL MALE

(For A/B/C/D Tube)

Double male fitting with the connection lugs at 90° to each other. This fitting can also be used to retain display panels etc. NOT DESIGNED TO WITHSTAND LATERAL LOADS.


173F
FEMALE SWIVEL SECTION

key clamp handrail - FEMALE SWIVEL SECTION

(For C/D Tube)

Used in conjunction with the male fittings 167M, 168M, 169M & 173M. NOT DESIGNED TO WITHSTAND LATERAL LOADS.


174
SWIVEL TEE

key clamp handrail - SWIVEL TEE

(For D Tube)

A versatile swivel fitting, often used for braces and where staircase middle rails join level sections. Tubes should not be joined within this fitting.

£15.90

175
SWIVEL ELBOW

key clamp handrail - SWIVEL ELBOW

(For D Tube)

A versatile swivel fitting, often used where top rails join level sections, or for braces.

£15.30

184
45° TEE

key clamp handrail - 45º TEE

(For B/C/D Tube)

A bracing and strut component to strengthen structures.


185
EAVES FITTING

key clamp handrail - EAVES FITTING

(For D Tube)

Used on the eaves end of a roof system in conjunction with the '191: RIDGE FITTING'.

£15.35

123
VARIABLE ELBOW 40-70°

key clamp handrail - VARIABLE ELBOW 40-70 DEGREES

(For D Tube)

Mainly for use at the top of a stairway decline. Variable angle between 40- 70°.

£12.70

750
ASSIST EXPANDING FITTING

key clamp handrail - ASSIST EXPANDING FITTING

(For D Tube)

£12.90

9931
PALLET FLANGE

key clamp handrail - PALLET FLANGE

(For D Tube)

Ideal for the construction of post pallets, with sockets for the upright and side tubes, plus locating bell for pallet stacking.

£39.90

191
RIDGE FITTING

key clamp handrail - RIDGE FITTING

(For D Tube)

Used on the ridge of a roof system in conjunction with the '185: EAVES FITTING'.

£13.35

199
ADJUSTABLE FIXING BRACKET

key clamp handrail - ADJUSTABLE FIXING BRACKET

(For C/D Tube)

For fixing panels, display boards or flooring to structures. Supplied with a pre-drilled hole.


A101
ADD ON SHORT TEE

key clamp handrail - ADD ON SHORT TEE

(For C/D Tube)

This fitting allows existing structures to be extended without any need for dismantling. The tube must not be joined within the add on short tee.


A161
90° ADD ON CROSSOVER

key clamp handrail - ADD ON CROSSOVER

(For C/D Tube)

90° bolt-on joint ideal for making additions or alterations to an existing structure where a 'CROSSOVER 7' cannot be used. Tubes should not be joined within the fitting.


129
ADJUSTABLE SHORT TEE 30-60°

key clamp handrail - ADJUSTABLE SHORT TEE 30-60º

(For B/C/D Tube)

For use on steeper slopes or stairs as a tee connector with an angle of 30-60° with the upright remaining vertical. Tube cannot be joined within the fitting. Normally used in conjunction with the '130: ADJUSTABLE 2 SOCKET CROSS 30-45°'.


130
ADJUSTABLE 2 SOCKET CROSS 30-45°

key clamp handrail - ADJUSTABLE 2 SOCKET CROSS 30-45º

(For B/C/D Tube)

For use on steeper slopes or stairs as an intermediate cross connector with an angle of 30-45° with the upright remaining vertical. Normally used in conjunction with the '129: ADJUSTABLE SHORT TEE 30-60°' when building double rail handrail or guardrail. This adjustable cross fitting is not recommended for use as the top fitting on handrail or guardrail.


151
ANGLE BASE FLANGE 11-30°

key clamp handrail - ANGLE BASE FLANGE 11-30º

(For C/D Tube)

Similar to the '152: BASE FLANGE FOR SLOPE UP TO 11°', this fitting is used to set the upright at an angle of 11º–30º. This fitting should only be subjected to light loads which cannot be positioned at 90º to the applied load. For greater loads or other tube sizes a 'BASE 1 TALL BASE' should be used with the upright bent to the required angle.


177
THREE SOCKET TEE 11-30°

key clamp handrail - THREE SOCKET TEE 11-30º

(For C/D Tube)

For use on safety railing with slopes of 11-30º, fixing the top rail to a vertical intermediate upright.


178
TWO SOCKET CROSS 11-30°

key clamp handrail - TWO SOCKET CROSS 11-30º

(For C/D Tube)

Used on safety railing with slopes of 11-30º, fixing the mid rail to a vertical intermediate upright.


key clamp handrail - RETURN BEND 33.7MM

HBend25113
Return Bend 33.7mm

300mm legs. Self colour.

£POA

key clamp handrail - STAIR RETURN BEND 33.7MM

HBend25124
Stair Return Bend 33.7mm

400mm legs. Self colour.

£POA

key clamp handrail - HANDRAIL RAMP BEND 33.7MM

HBend25135
Handrail Ramp Bend 33.7mm

500mm legs. Self colour.

£POA

key clamp handrail - HANDRAIL 90º BEND 33.7MM

HBend25143
Handrail 90° Bend 33.7mm

300mm legs. Self colour.

£POA

key clamp handrail - HANDRAIL STANDARD RETURN BEND 33.7MM

HBend25213
Handrail Standard Return Bend 33.7mm

25NB. 300mm legs. Galvanised.

£POA

key clamp handrail - HANDRAIL STANDARD RETURN BEND 33.7MM

HBend25214
Handrail Standard Return Bend 33.7mm

400mm legs. Galvanised.

£POA

key clamp handrail - HANDRAIL STANDARD STAIR RETURN BEND 33.7MM

HBend25224
Handrail Standard Stair Return Bend 33.7mm

400mm legs. Galvanised.

£POA

key clamp handrail - HANDRAIL STANDARD RAMP BEND 33.7MM

HBend25235
Handrail Standard Ramp Bend 33.7mm

500mm legs. Galvanised.

£POA

key clamp handrail - HANDRAIL STANDARD 90º BEND 33.7MM

HBend25243
Handrail Standard 90° Bend 33.7mm

300mm legs. Galvanised

£POA

key clamp handrail - HANDRAIL STANDARD RETURN BEND 42.4MM

HBend32213
Handrail Standard Return Bend 42.4mm

32NB. 300mm legs. Galvanised.

£POA

key clamp handrail - HANDRAIL STANDARD STAIR RETURN BEND 42.4MM

HBend32224
Handrail Standard Stair Return Bend 42.4mm

400mm legs. Galvanised.

£POA

key clamp handrail - HANDRAIL STANDARD 90º BEND 42.4MM

HBend32243
Handrail Standard 90° Bend 42.4mm

300mm legs. Galvanised.

£POA

Handrail slope fittings

For railings required on slopes and ramps between 0-11°.

Available to suit tube 'D' (Ø48.3mm).

NB. The tolerance on standard fittings is between 3-5°.

key clamp handrail slope fittings
152
BASE FLANGE FOR SLOPE UP TO 11°

key clamp handrail - Base flange for slope up to 11°;

Fits 'D' tube only

For use as a structural base for sloping handrail or guardrail of 0-11° enabling the upright to remain vertical.

£11.95

153
SHORT TEE FOR SLOPE UP TO 11°

key clamp handrail - Short tee for slope up to 11°

Fits 'D' tube only

For use on shallow sloping handrail or guardrail of 0-11° to connect the upright to the top rail or the end or mid rail to the upright. Normally used in conjunction with the '154: ELBOW FOR SLOPE UP TO 11°. Tubes may not be joined inside this fitting - to join tubes use the '155: LONG TEE FOR SLOPE UP TO 11°'.

£7.22

154
ELBOW FOR SLOPE UP TO 11°

key clamp handrail - Elbow for slope up to 11°

Fits 'D' tube only

For use on shallow sloping handrail or guardrail of 0-11° at the start or end of a run to connect the upright to the top rail. This elbow may be used at either the bottom or top of an incline. Normally used in conjunction with the '153: SHORT TEE FOR SLOPE UP TO 11°' fitting.

£9.45

155
LONG TEE FOR SLOPE UP TO 11°

key clamp handrail - Long tee for slope up to 11°

Fits 'D' tube only

For use on shallow sloping handrail or guardrail of 0-11° to connect the upright to the top rail. Tubes may be joined inside this fitting. Normally used in conjunction with the 156: TWO SOCKET CROSS FOR SLOPE UP TO 11°' fitting.

£11.25

156
TWO SOCKET CROSS FOR SLOPE UP TO 11°

key clamp handrail - Two socket cross for slope up to 11°

Fits 'D' tube only

For use on shallow sloping handrail or guardrail of 0-11° to connect the mid or lower rails to the upright. The upright must remain continuous with the cross rails cut. Normally used in conjunction with the '155: LONG TEE FOR SLOPE UP TO 11°' fitting.

£11.25

KEY CLAMP GRUB SCREWS

key clamp handrail - GRUB SCREWS

(For A/B/C/D/E Tube)

Proprietary coated, case hardened setscrews. When tightened to a torque of 39Nm they give a slip load of 900kg to a safety factor of 2.


KEY CLAMP ALLEN KEY

key clamp handrail - ALLEN KEY

(For A/B/C/D/E Tube)

Hexagonal Allen Key - the only tool required to tighten up a setscrew.


Galvanised Tube

Available in various lengths
1.044m to 6.5m

SPECIAL OFFER!
CARRIAGE ONLY £10!

TUBE SIZES
A Tube: 26.9mm dia
B Tube: 33.7mm dia
C Tube: 42.4mm dia
D Tube: 48.3mm dia
E Tube: 60.3mm dia


key clamp handrail - Fabricated Safety Gate & 2 Posts - L/H - 42.4mm Tube - Self Closing

Fabricated Safety Gate & 2 Posts - L/H
42.4mm Tube - Self Closing

FSG-LH-42

£149.00

key clamp handrail - Fabricated Safety Gate & 2 Posts - R/H - 42.4mm Tube - Self Closing

Fabricated Safety Gate & 2 Posts - R/H
42.4mm Tube - Self Closing

FSG-RH-42

£149.00

gate hinge kit

key clamp handrail - Hinge Kit For Safety Gate - stainless

Hinge Kit For Safety Gate - stainless

HKFSG-SS

For Welding To Round S/S Tube Sections

• Adjustable closing speed
• Plate with slotted pin
• Plate with pin hole
• Plain plate
• Spring and lock nut
• M8 x 20 countersunk screws
• Washers

£185.00

key clamp handrail - Hinge Kit For Safety Gate - stainless

Hinge Kit For Safety Gate - stainless

HKFSG-T

For Welding To Tubular Sections

• Adjustable closing speed
• Plate with slotted pin
• Plate with pin hole
• Plain plate
• Spring and lock nut
• M8 x 20 countersunk screws
• Washers

£99.00

key clamp handrail - Hinge Kit For Safety Gate - stainless

Hinge Kit For Safety Gate - stainless

HKFSG-SQ

For Welding To Square Section

• Adjustable closing speed
• Plate with slotted pin
• Plate with pin hole
• Plain plate
• Spring and lock nut
• M8 x 20 countersunk screws
• Washers

£99.00

key clamp handrail - SPRUNG GATE HINGE

key clamp handrail - Hinge Kit For Safety Gate

Hinge Kit For Safety Gate

25SGH

For Welding To Tubular Sections

£66.95

key clamp handrail - Hinge Kit For Safety Gate

Hinge Kit For Safety Gate

25SGHS

For Welding To Square Sections

£66.95

key clamp handrail - Rubber Gate Bump Stop

Rubber Gate Bump Stop

Dia 20mm x L 25mm

£5.95

Galvanised Tube Handrail Standard
2B-550-550

key clamp handrail - Galvanised Tube Handrail Standard

10mm flat drilled ø18 holes
for M16 bolts
(For B/C/D Tube)


Galvanised Tube Handrail Standard
3C-550-550

key clamp handrail - Galvanised Tube Handrail Standard

12mm flat drilled ø18 holes
for M16 bolts
(For B/C/D Tube)


Galvanised Tube Handrail Standard
4D-550-550

key clamp handrail - Galvanised Tube Handrail Standard

10mm flat drilled ø18 holes
for M16 bolts
(For B/C/D Tube)


Adjustable Railings - Galvanised

The pivot point offers an adjustable angle to handrail standards, allowing for instant installation of handrail on slopes, so no more waiting for the fabrication of costly raked standards.
Load tested.
No fabrication of raked specials required.
Flexible on site adjustment
.

Adjustable Rail
FHB2B

key clamp handrail - adjustable handrail

(For B/C Tube)


Adjustable Rail
FHB3C

key clamp handrail - adjustable handrail

(For B/C Tube)


Adjustable Rail
FHB4D

key clamp handrail - adjustable handrail

(For B/C Tube)


Pre-assembled safety posts
for 'C' tube

These pre-assembled tube clamp posts help reduce installation time.

They are supplied in a standard height of 1100mm and constructed using 'C' tube (Ø42.4mm).

Used in conjunction with tube cross rails of 1450mm, they conform to Building Regulations.

1603001C
End post
assembled

key clamp handrail - End post assembled

'C' tube
1100mm ø42.4

£39.59

1603002C
Middle post assembled

key clamp handrail - Middle post assembled

'C' tube
1100mm ø42.4

£42.99

1603003C
Corner post
assembled

key clamp handrail - Corner post assembled

'C' tube
1100mm ø42.4

£43.99

Pre-assembled safety posts
for 'D' tube

These pre-assembled tube clamp posts help reduce installation time.

They are supplied in a standard height of 1100mm and constructed using 'D' tube (Ø48.3mm).

Used in conjunction with tube cross rails of 1450mm, they conform to Building Regulations.

1603001D
End post
assembled

key clamp handrail - End post assembled

'D' tube
1100mm ø48.3

£39.59

1603002D
Middle post assembled

key clamp handrail - Middle post assembled

'D' tube
1100mm ø48.3

£42.99

1603003D
Corner post
assembled

key clamp handrail - Corner post assembled

'D' tube
1100mm ø48.3

£43.99

Disabled Access Range

The DDA Range is designed to meet the requirements of part 'M'
of the Building Regulations 2004 regarding provisions for disabled people. 

The DDA range conforms to the requirement for smooth continuous handrail
using 42.4mm O/D galvanised tube.

The Building Regulations state the rail shall be between 40 and 45mm O/D.

All fittings are cast iron and galvanised to BS EN ISO 1461.

Suitable for stairs, ramps and walkways.

For uprights use Type D tube (48.3mm). For horizontals use Type C tube (42.4mm).

DDA01
Upright connector

key clamp handrail - DDA - Upright connector

To attach the 'DDA04 INTERMEDIATE BRACKET' or the 'DDA02 HANDRAIL CONNECTOR' to the 48.3mm o/d upright.

£10.88

DDA02
Handrail curve

key clamp handrail - DDA - Handrail curve

To attach the end of the 42.4mm o/d handrail tube at 90° to the 48.3mm
o/d upright. Used in conjunction with DDA01 UPRIGHT CONNECTOR and DDA07 INTERNAL CONNECTOR.

£12.50

DDA03
Wall bracket

key clamp handrail - DDA - Wall bracket

To support 42.4mm o/d handrail tube to a wall. The tube is fixed to this WALL BRACKET using either 2 x self tapping screws or 2 x pop rivets.

£13.47

DDA04
Intermediate bracket

key clamp handrail - DDA - Intermediate bracket

To support the top or middle rail tube at an upright in conjunction with a 'DDA01 UPRIGHT CONNECTOR'. The 42.4mm o/d tube is fixed to this fitting using either 2 x self tapping screws or 2 x pop rivets.

£13.50

DDA05
End return

key clamp handrail - DDA - End return

For terminating the 42.4mm o/d handrail tube back to a wall. Used in conjunction with a DDA07 INTERNAL CONNECTOR.

£13.25

DDA06
90° Bend

key clamp handrail - DDA - 90° Bend

Expanding elbow for creating a smooth 90° bend in the 42.4mm o/d tube.

£15.50

DDA07
Internal connector

key clamp handrail - DDA - Internal connector

Expanding internal connector for joining sections of 42.4mm o/d tube, or other DDA fittings.

£4.99

DDA08
End cap - plastic

key clamp handrail - DDA - End cap

48.3mm o/d plastic end cap for inserting into the open tube on the top of the upright. For a permanent fix, a suitable adhesive should be used.

64p

DDA09
Adjustable bend

key clamp handrail - DDA - Adjustable bend

For creating an adjustable bend between the horizontal and the vertical.

£25.95

DISABLED ACCESS HANDRAIL DISABLED ACCESS HANDRAIL DISABLED ACCESS HANDRAIL DISABLED ACCESS HANDRAIL

Selector Guide for LEVEL Handrail

key clamp selector guide - LEVEL HANDRAIL

Selector Guide for SLOPING Handrail

key clamp selector guide - SLOPING HANDRAIL

 

© www.ironfinials.co.uk 2009-present date.
Our Terms & Conditions are simple: you pay us & we promise to deliver exactly what you have ordered.
Click here for Return, Cancellation & Delivery Policies.
Bexhill Steelwoks, Unit 3, Breadsell Farm, St Leonards-on-Sea, TN38 8EB.
Registered in England - Company No. 05368388. VAT No. 850735425.

email view basket